54
No feeding or multiple feeding occurs frequently, adjust the feeder pressure.
Adjusting the feeder pressure
A
C
B
1
Open the front lid by pressing the front lid open
button.
2
Shift the position of the lever by using an instrument
with a pointed end, like a clip or ball-point pen.
Position A: Select this when documents do not feed.
Position B: Standard position (pre-selected)
Position C: Select this when documents
multiple feed.
3
Close the front lid by gently pressing down on both
ends.
Front lid
open button
Lever
1
2
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Hooks
Removing the handset cradle
1
Set the handset switch to NO HANDSET (see
page 43).
2
Pull the hooks to the right in the order as shown,
while lifting up the handset cradle.
3
Disconnect and connect the power cord again.
Caution:
If the handset and handset cradle have been
removed when you connect the power cord, an
alarm will sound and the following message will
be displayed.
Set the handset switch to NO HANDSET (see
page 43).
CHECK CRADLE