Receiving using an extension
40
2
3
4
5
6
7
8
9
0
1
1
Press
(MENU)
.
2
Press
K
, then
D A
.
3
Press
(START/COPY/SET)
.
4
Press
(‹)
or
(›)
to select the desired setting.
¡
If this feature is not required, select “OFF”.
5
Press
(START/COPY/SET)
.
6
Enter the new code number.
7
Press
(START/COPY/SET)
.
8
Press
(MENU)
.
CODE=
UU
MODE=ON [
ÿŸ
]
REMOTE FAX ACT.
SYSTEM SET UP
Remote fax receiving
(using an extension to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a fax message. Using the extension
phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing
(START/COPY/SET)
.
Important:
¡
To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
¡
The remote fax activation code is set to “
UU
” as a pre-selected setting.
1
When a call is received, lift the handset of the
extension phone.
2
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
3
Hang up the handset.
¡
The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character
*
.
Note:
¡
Some special telephone company services
will require you to press a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.
¡
If the remote fax activation code is set to
“0000”, the unit does not work properly.
(MENU)
Dial keypad
(START/COPY/SET)
To the same line
Extension phone
(‹)
(›)
