8. Answering Machine
50
{*}{#}
End of remote operation
L
You can also hang up to end the remote
operation at any time.
{#}
Skip the greeting message (During
greeting message playback)
L
The unit will skip the rest of the greeting
message.
Recording a marker message
After playing back messages, you can leave an
additional message.
1.
Wait about 10 seconds.
2.
Leave a message after the beep.
To turn ON the AUTO ANSWER mode
1.
Call your unit and let it ring 10 rings.
L
The answering machine will temporarily
answer the call.
L
A long beep will sound.
2.
Enter the remote operation ID (feature #11 on
page 52) within 8 seconds.
L
The unit will play the greeting message,
and the auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 55).
3.
Hang up the handset.
8.5 Pager call
This feature allows your unit to call your pager
when your unit receives an incoming voice
message (a call can also be made to a mobile
phone).
1
Press
{
MENU
}
.
2
Press
{#}
, then
{
7
}{
0
}
.
3
Press
{A}
or
{B}
repeatedly to select
“
ON
”
.
4
Press
{
SET
}
.
5
Enter your pager number and/or pauses (up
to 46 digits).
Example:
1 202 555 1234PP12345678PP5555#
–
1 202 555 1234:
Your pager number
–
PP:
Pauses
–
12345678:
Your pager access code, if
required.
–
5555 (example):
Message you want
displayed on your pager.
6
Press
{
SET
}
.
L
The unit will dial the stored number.
7
Check that your pager received the pager
test call.
8
Press
{
MONITOR
}
, or wait for 10 seconds
(pager only).
When your pager receives a pager call
Your pager will display the message you entered
in step 5 (for example:5555).
{
MONITOR
}
{A}{B}
{
SET
}
{
MENU
}
FC971CX-PFQX2269ZA-en.book Page 50 Friday, August 5, 2005 8:29 AM