39
Sending Faxes
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
●
If necessary, press
repeatedly to select the desired setting
(p. 31).
2
Press the desired (1–2) or
.
●
You can also use
. Display the
desired key name, and press
.
Example:
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
<BROADCAST1>
FAX START
JOG DIAL
MANUAL BROAD
RESOLUTION
FACE DOWN
FACE DOWN
Display
RESOLUTION
STOP
JOG DIAL
FAX START
SET
BROADCAST
MANUAL BROAD
Note:
●
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press
while the unit displays the
following message.
Display:
●
The display will show the following.
2. Press
.
SET
YES:SET/NO:STOP
SEND CANCELED?
BROADCASTING
STOP
The “ ” mark shows the fax has been sent to the fax server of
the NetMoves network (p. 35). The number shows the total
number of pages sent to the fax server.
NO.
01
02
03
04
Mike
Peter
Sam
Kim
USAGE TIME
01'10
01'08
01'09
01'10
004'37
PAGES
02
02
02
02
008
OK
OK
OK
OK
START TIME
Jan. 10 2000 09:36AM
YOUR LOGO :
YOUR FAX NO. :
Jan.10 09:31AM
Jan.10 09:33AM
Jan.10 09:34AM
Jan.10 09:35AM
TOTAL
RESULT
(IQ-FAX)
OTHER FACSIMILE
(008)
BROADCAST REPORT 1
Sample of a broadcast sending report
BROADCAST