Code
Function
Set Value
Effective Range
Default
Remarks
596
Transmit level set
X dBm
- 15~00
10
Selects the FAX transmission
level.
598
Receiving sensitivity
43= -43 dBm
20~48
43
Used when there is an error
problem.
602
Warning LIST Printing
1:ON 2:OFF
1, 2
1
Used to print a caution list
when setting the TEL/FAX
mode and ring detection.
700
EXT. TAM OGM Rec.time
X second
01~99
10
Set the start time of silent
detection.
701
No voice detect time
X100 msec
01~99
50
Sets the silent call confirmation
detection time.
717
Transmit speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1~4
1
Adjusts the speed to start
training during FAX
transmission.
718
Receive speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2900BPS
1~4
1
Adjusts the speed to start
training during FAX reception.
719
Ringer off in TEL/FAX mode
1:ON 2:OFF
1, 2
1
Sets the ringer switch off when
a call is received in the
TEL/FAX mode.
721
Pause tone detect
1:ON 2:OFF
1, 2
1
Selects the tone detection for
pause in dialing.
722
Redial tone detect
1:ON 2:OFF
1, 2
1
Selects the tone detection
mode after redialing.
745
Poewr ON film feed
1:ON 2:OFF
1, 2
1
When the power is turned on,
the film is wound to take up
any slack.
763
CNG detect time for friendly
reception
1:10 sec 2:20 sec
3:30 sec
1~3
3
Selects the CNG detection
tome of friendly reception.
771
T1 timer
1:35 sec 2:60 sec
1, 2
1
Sets a higher value when the
response from the other party
needs more time during FAX
transmission.
815
Sensor & Vox check
See 2.5. TEST FUNCTIONS.
852
Print test pattern
See 2.5. TEST FUNCTIONS.
853
Top margin
1~9
--------
854
Left margin
1~8
--------
861
A4 size set
1:ON 2:OFF
1, 2
2
Used only at the factory.
880
History list
See 2.4.6. HISTORY.
890
TEL/FAX ring back tone
1:ON 2:OFF
1, 2
1
Selects whether the TEL/FAX
1st ring back tone is ON or
OFF in the TEL/FAX mode.
88
KX-FP101
Summary of Contents for KX-FP105BX
