background image

2. Preparation

20

For Fax Advantage assistance, call 1-800-435-7329.

2.4 Case 1: TAM/FAX 
(Telephone Answering 
Machine/Fax)

2.4.1 Your situation

You wish to use this unit as a telephone 
answering machine and fax.

2.4.2 How to setup

1

Press 

{

MENU

}

.

2

Press 

{#}

 then 

{

0

}{

0

}

.

QUICK SETUP

PRESS SET

3

Press 

{

SET

}

.

PRINT SETUP?
YES:SET/NO:STOP

4

Press 

{

SET

}

 again to print the Quick Setup 

Guide.

L

If you do not wish to print it, press 

{

STOP

}

.

5

Press 

{A}

 or 

{B}

 repeatedly to display the 

following.

SELECT A SETUP
=TAM/FAX

[

±

]

6

Press 

{

SET

}

.

L

The 

{

AUTO ANSWER

}

 indicator turns 

ON.

7

Press 

{

MENU

}

.

Note:

L

You can change the ring setting in TAM/FAX 
mode (feature #06 on page 61).

2.4.3 How to receive calls

When receiving calls, the unit works as a 
telephone answering machine and fax.

L

If the call is a phone call, the unit will record a 
voice message automatically.

L

If a fax calling tone is detected, the unit will 
receive the fax automatically.

Note:

L

Do not connect an answering machine to the 
same telephone line. If one is connected, set 
the automatic answer feature to OFF.

L

Do not subscribe to voice mail service as it 
may disturb fax reception. If you do subscribe 
to a voice mail service, call Panasonic Fax 
Advantage assistance at 1-800-435-7329 for 
more information.

{

SET

}

{

STOP

}

{A}{B}

On

{

MENU

}

FPG376.book  Page 20  Wednesday, July 30, 2003  6:28 PM

Summary of Contents for KX-FPG376































































































Reviews: