3. Telephone
49
Note:
L
If the room monitor feature of the destination
unit is OFF, “
DENIED
” will be displayed and
busy tone will sound.
3.18 2-way radio
communication (when the
system has additional
handsets)
If you purchase additional handsets (page 9),
you can use two handsets in 2-way radio mode,
which allows the two handsets to communicate
with each other completely independent of the
base unit. To use this feature, this 2-way radio
mode must be turned ON for both handsets.
Once the mode is ON, the handset can be
used only to talk in 2-way radio mode, and
the following features cannot be used:
–
Making/answering external and internal
calls
–
Searching caller information or the
directory
–
Programming
–
Accessing mailboxes to listen to
messages
–
Receiving Caller ID information
After using 2-way radio mode, remember to
turn the mode OFF, otherwise battery life
(page 20) will be shortened.
L
Keep the front cover page open for button
locations.
3.18.1 To turn the 2-way radio
mode ON
Make sure the handset is not being used.
1
Press
{
CONF/FUNCTION
}
.
2
Scroll to “
2Way radio mode
” by pressing
{v}
or
{e}
, then press
{>}
.
3
Press
{v}
or
{e}
repeatedly to select “
On
”.
4
Press the right soft key (
{
SAVE
}
).
L
The display will show “
2Way radio
mode
”.
To turn the mode OFF
Place the handset on the charger.
L
“
2Way radio mode
” will disappear and the
mode will turn OFF.
L
You can also turn OFF the mode as follows:
1.
Press
{
CONF/FUNCTION
}
.
2.
Press
{v}
or
{e}
repeatedly to select
“
Off
”.
3.
Press the right soft key (
{
SAVE
}
).
3.18.2 To call another handset
Make sure the mode is ON on both your
handset and the destination handset, and the
displays show “
2Way radio mode
”.
1
Press
{
TALK
}
,
{
SP-PHONE
}
or
{
INTERCOM/TRANSFER
}
.
2
Enter an extension number using a dialing
button (
{
1
}
to
{
8
}
).
L
The called handset will ring for 1 minute.
L
To stop calling, press
{
OFF
}
.
3
When the called party answers, talk into the
handset.
L
You can switch to the receiver or the
speaker by pressing
{
TALK
}
or
{
SP-
PHONE
}
.
4
To end the conversation, press
{
OFF
}
.
To adjust the ringer volume for 2-way radio
mode (high/medium/low/off)
While the handset is not in use, press
{v}
or
{e}
.
L
To turn the ringer OFF, press
{v}
repeatedly
until “
Off
” is displayed. “
Ringer off
” will
be displayed.
3.18.3 To answer a call
1
Press
{
TALK
}
,
{
SP-PHONE
}
or
{
INTERCOM/TRANSFER
}
to answer the
call.
2
To end the conversation, press
{
OFF
}
.
0519_FPG381.book Page 49 Monday, May 19, 2003 6:46 PM
