9. Option
77
9 Option
Multi - Units
9.1 Canceling the handset
registration
If you no longer need to use the handset or if you
need to register the handset to a different base
unit of the same model, it may be necessary to
cancel the registration.
Only one handset can be canceled at a time near
the base unit.
Make sure the handset and the base unit are
not being used.
L
Keep the front cover page open for button
locations.
1
Press
{
CONF/FUNCTION
}
.
2
Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, and press
{>}
.
3
Scroll to “
Registration
” by pressing
{v}
or
{e}
, and press
{>}
.
4
Scroll to “
Deregistration
” by pressing
{v}
or
{e}
, and press
{>}
.
5
Press
{
3
}{
3
}{
5
}
(DEL.) to delete the
registration memory.
L
If you make a mistake, press
{
HOLD/CLEAR
}
, and enter
{
3
}{
3
}{
5
}
.
6
Press the right soft key (
{
OK
}
).
L
A beep will sound and the registration
memory will be erased on both the
handset and the base unit.
L
“
[-]
” is shown on the top right of the
display.
L
If 3 beeps sound, you entered a wrong
code. Try again from step 5.
Note:
L
If you do not press a button for more than 3
minutes, the unit will return to the standby
mode.
L
To register the handset to another base unit
of the same model, start from step 5 in the re-
registering the handset procedure on page
77, or see page 32.
L
The handset will not work. To use it again,
registration will be required (page 32, 77).
9.2 Re-registering the
handset
If you want to re-register the handset to the base
unit or a different base unit of the same model,
you need to register it to that base unit. The
handset will be given a new extension number of
that base unit. Only one handset can be
registered at a time.
Make sure the base unit
and the other handsets are not being used.
Registration must be completed within 1
minute.
L
If you have canceled the handset registration
at the previous base unit (page 77), start from
step 5.
L
Keep the front cover page open for button
locations.
1
Handset:
Press
{
CONF/FUNCTION
}
.
2
Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, and press
{>}
.
3
Scroll to “
Registration
” by pressing
{v}
or
{e}
, and press
{>}
.
4
Press
{>}
at “
HS registration
”.
5
Base unit:
Press
{
MUTE
}
.
6
Handset:
1.
Press the right soft key (
{
OK
}
).
2.
Wait until a long beep sounds and the
display shows the registered number.
The registration will be complete.
L
The registered number “
[1]
” to “
[8]
”
will be shown on the top right of the
display.
O K
O K
0519_FPG381.book Page 77 Monday, May 19, 2003 6:46 PM
