Features Summary
-73-
Code #30: Changing the silent fax
recognition ring setting
SILENT FAX RING
To change the number of rings when the
unit detects a phone call in TEL/FAX mode.
You can select from
3 (default)
,
4
,
5
,
6
,
7
,
8
and
9
. See page 49 for details.
Code #31: Setting the ring detection
RING DETECTION
See page 55 for details.
Code #39: Changing the display
contrast
LCD CONTRAST
NORMAL (default):
For normal contrast.
DARKER:
Used when the display contrast
is too light.
Code #41: Changing the fax activation
code
FAX ACTIVATION
If you use an extension telephone and wish
to use it to receive a fax, activate this
feature and program the activation code.
1.
Follow steps 1–4 on page 69.
2.
Press
{+}
or
{-}
to select “ON”.
3.
Press
{
SET
}
.
4.
Enter your code from 2 to 4 digits, using
0–9 and
*
.
L
The default code is “
@@@
9
”.
L
Do not enter “0000”.
5.
Press
{
SET
}
.
6.
Press
{
MENU
}
.
Code #42 (KX-FT78 only): Setting the
message alert
MESSAGE ALERT
To alert you with beeps when a new voice
message is recorded. If you hear slow
beeps, press
{
PLAY MESSAGES
}
and
listen to recorded messages. The beeps
will stop.
ON:
You will hear a beeping sound.
OFF (default):
Deactivated this feature.
Code #43 (KX-FT78 only): Setting the
recording time alert
REC. TIME ALERT
To alert you with beeps when there is less
than 60 seconds of remaining recording
time. If you hear slow beeps, erase the
recorded messages (page 63). The beeps
will stop.
ON:
You will hear a beeping sound.
OFF (default):
Deactivated this feature.
Code #46: Setting the friendly reception
FRIENDLY RCV
To receive a fax automatically when you
answer a call and hear a fax calling tone
(slow beep).
ON (default):
You do not have to press
{
FAX/START
}
for fax reception.
OFF:
You have to press
{
FAX/START
}
for
fax reception.
FT74-78HK.book Page 73 Friday, June 28, 2002 9:45 AM
