![background image](http://html.mh-extra.com/html/panasonic/kx-hnc600/kx-hnc600_installation-manual_268974025.webp)
Replacing sensor range caps
1
Remove the attached standard cap.
2
Remove the desired sensor range cap from one of the 4 types (
A
) and attach it to the
sensor (
B
).
R
When attaching, rotate the tab (
1
) on the cap toward the top or at a 45-degree angle
according to the type of cap or direction, and attach the cap on the camera, shown in the
following illustration.
1
2
1
For assistance, please visit http://shop.panasonic.com/support
25
Appendix
HNC600_(en_en)_0123_ver.201.pdf 25
2017/01/26 9:24:43