Ideal example
Structure supports exterior surface
A
A
A
A
PLACE HOLDER
PLACE HOLDER
Siding
Structure behind siding
Concrete
R
Do not use the included screws. Use
screw anchors (screw ø: 4 mm
(5/32 inches)) designed for concrete
walls.
R
Carefully read the instructions
supplied with the anchors. Follow
instructions regarding drill bit
diameter, hole depth, etc.
R
Drill a pilot hole. Remove any debris
after drilling the pilot hole.
1
Mark the hole depth on the drill bit
(
A
) and then drill a pilot hole.
A
2
Remove debris.
3
Insert the anchor, tighten the screw,
then remove the screw to secure the
anchor.
4
Insert the screw through the
mounting stand (
A
) and tighten it.
A
ALC (autoclaved lightweight cellular
concrete)
R
Depending on the type of ALC panel,
you may not be able to attach the unit.
Consult the ALC panel manufacturer.
R
Do not use the included screws. After
consulting the manufacturer of the
ALC panel, use only
commercially-available metal screw
anchors (screw ø: 4 mm
(5/32 inches)) designed for ALC
panels.
R
Carefully read the instructions
supplied with the anchors. Follow
instructions regarding drill bit
diameter, hole depth, etc.
R
Drill a pilot hole. Remove any debris
after drilling the pilot hole.
R
Seal the pilot hole with a
commercially-available waterproof
sealant.
Other materials (mortar, tile, etc.)
R
Do not use the included screws.
R
Consult the builder or licensed
professional regarding the type of
anchor appropriate for the installation
location and materials.
R
Do not install on gypsum board or
concrete blocks.
16
For assistance, please visit http://shop.panasonic.com/support
Setup
