I want to detect people entering the
garage
Refer to the example below for detecting
people entering a garage without
detecting cars in the street.
Poor example
PLACE HOLDER
PLACE HOLDER
Visitors approach the unit from the front
and are therefore more difficult to detect.
Cars in the street are more likely to
cause false detections.
Ideal example
PLACE HOLDER
PLACE HOLDER
Visitors pass in front of the unit from side
to side. Cars in the street are less likely
to cause false detections.
Do not install in these
locations
Installing in the following areas may
cause deformation, discoloration,
malfunction, or operational failure
R
In direct sunlight or directly under an
outdoor light (even if the surroundings
are within operational temperature
range, parts of the product may
become hot)
R
Areas subject to frequent vibration,
shock, or impact
R
Near fire, heating devices, magnetic
fields (such as near magnets), or air
conditioners (including outdoor
equipment such as unit compressors)
R
Areas exposed to grease or steam
R
Near devices that emit strong radio
waves, such as mobile phones
R
Areas subject to extreme temperature
changes (which can lead to
condensation)
R
Near coasts directly subjected to sea
breezes, or near sulfuric hot springs
(exposure to salt can shorten the life
of the product)
R
Near TVs, radios, automated office
equipment such as computers, air
conditioners, water heater panels
(with intercom), or home security
equipment (these may cause noise)
R
Near satellite broadcasting receivers
such as tuners, TVs with built-in
satellite tuners, and recorders
(broadcasted images may be
distorted)
R
Areas where hydrogen sulfide,
ammonia, dust, or toxic gases are
present
10
For assistance, please visit http://shop.panasonic.com/support
Installation Location
