Inserting the
batteries
R
USE ONLY Alkaline batteries AA
(LR6) size.
R
Do NOT use Manganese/Ni-Cd/
Ni-MH batteries.
R
Confirm the polarities (
,
).
1
Remove the rear cover by
pressing the upper sides of the
cover (
A
) and sliding it down (
B
).
A
B
2
Insert the batteries.
3
Install the rear cover.
R
Place it with the “
” mark
facing upwards and slide it.
Note:
R
If the sensor’s battery power is low,
a message will be displayed on the
[Sensor]
screen of the
[Home
Network]
app. We recommend you
check this screen periodically to
ensure that the battery does not
become fully discharged. For more
information, refer to the User’s
Guide (page 18).
10
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Setup
HNS104EX_(en_en)_0111_ver.305.pdf 10
2017/01/11 18:33:55