Adjusting the sensor
sensitivity
You can use the
M
HIGH
N
/
M
LOW
N
switch
(page 9) to adjust the sensor’s
sensitivity.
Set it to
M
LOW
N
if the sensor frequently
makes false detections.
Features available
when using the
[Home Network] app
Some of the sensor’s features that are
available when using the
[Home
Network]
app are listed below. For
more information, refer to the User’s
Guide (page 18).
–
Alarm system
You can use the app to arm and
disarm the alarm system, confirm
the current status of the sensor, and
view a log of previous events.
–
Sensor integration
You can configure the sensor to
trigger other system events, such as
camera recording, turning on an
electric device (such as a lamp), etc.
(Appropriate device required.)
–
Telephone alert
You can configure the system to call
a preprogrammed phone number
when the sensor is triggered.
Accessing the User’s
Guide
The User’s Guide is a collection of
online documentation that helps you
get the most out of the
[Home
Network]
app.
1
iPhone/iPad
Tap
in the app’s home screen.
Android™ devices
Tap or press your mobile
device’s menu button in the app’s
home screen.
2
Tap
[User’s Guide]
.
Note:
R
Microsoft
®
Windows
®
Internet
Explorer
®
8 and earlier versions are
not supported.
R
Android 4.1 or later versions are
recommended.
R
You can also access the User’s
Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/
18
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Appendix
HNS104EX_(en_en)_0111_ver.305.pdf 18
2017/01/11 18:33:55
