3
Use the DC extension cord (
A
) to
connect the AC adaptor (
B
) to the
siren.
R
Insert the male plug of the DC
extension cord (
C
) firmly into
the DC socket (
D
,
E
).
R
Insert the female plug of the DC
extension cord (
F
) firmly into
the AC adaptor plug (
G
).
4
Connect the AC adaptor to the
power outlet (
H
).
5
8
6
7
4
1
3
2
5
Attach the siren to the rear cover.
R
Insert the grooves on the siren
to the 4 tabs on the rear cover,
and then push down the siren.
Note:
While the siren is sounding or the
strobe light is flashing, you can stop the
siren by pressing
M
N
.
Note about power
connections
AC adaptor connection
R
The AC adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use.)
R
The AC adaptor should be
connected to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it
to become disconnected.
Power failure
R
The siren will not work during a
power failure.
12
Setup
HNS105AZ_(en_en)_0622_ver.001.pdf 12
2015/06/22 20:09:48
