5
Insert the paper input tray into the unit.
Note:
R
If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
R
If the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.
To expand the paper exit
You can temporarily expand the paper exit before
printing.
– When printing on small sized paper, you can pull it
out easily.
– When printing several pages (20 to 30 pages), paper
stacking will be supported.
R
After use, pull up the paper exit, and then replace the
tab (
A
) to the original position.
A
Caution for the paper input tray
R
Do not drop the paper input tray.
R
Hold the paper input tray with both hands when
removing or installing. The paper input tray
weighs approximately 1.5 kg (3.3 lb) when fully
loaded with recording paper.
Approx. 1.5 kg (3.3 lb)
For assistance, please visit http://www.panasonic.com/help
15
1. Introduction and Installation
Summary of Contents for KX-MB1500
Page 78: ...78 Notes ...
Page 79: ...79 Notes ...