background image

2.5 Date and time (KX-MB1520
only)

We recommend setting the date and time. The other
party will receive your unit’s date and time as the header
information.

M

Set

N MFNMEN

M

Menu

N

M

Fax

N

1

M

Menu

N

 

A

 

MBNM

1

NM

0

NM

1

N

 

A

 

M

Set

N

2

Enter the current month/date/year by selecting 2
digits for each.

Example: August 3, 2011

M

0

NM

8

N

 

M

0

NM

3

N

 

M

1

NM

1

N

3

Enter the current hour/minute by selecting 2 digits for
each.

Example: 10:15 PM (12 hour clock format)
1.

M

1

NM

0

N

 

M

1

NM

5

N

2.

Press 

MGN

 repeatedly to select 

PM

.

4

M

Set

N

5

Press 

M

Menu

N

 to exit.

Note:

R

To check the current date and time setting,
temporarily change the unit to the fax mode by
pressing 

M

Fax

N

 repeatedly (page 17).

R

Your unit’s date and time will be used as the header
information for the following:
– When sending faxes (page 35).

R

If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.

R

The accuracy of the clock is approximately ±60
seconds a month.

R

If you select French for the language (feature #110
on page 46), the time is set using a 24 hour clock.

Example: 15:15

Press 

M

1

NM

5

N

 

M

1

NM

5

N

.

To correct a mistake

Press 

MFN

 or 

MEN

 to move the cursor to the incorrect

number, and make the correction.

If you have subscribed to a Call Display service

The date and time will be automatically set according to
the received caller information.

R

If the time has not previously been set, Call Display
will not adjust the clock.

R

You can turn this feature OFF (feature #226 on
page 48).

19

2. Preparation

Summary of Contents for KX-MB1500C

















































































Reviews: