2.1 Connections
Caution:
R
When you operate this product, the power outlet
should be near the product and easily accessible.
C
A
B
D
* The pictured model is KX-MB2011.
Power cord
R
Connect to a power outlet
(220–240 V, 50 Hz).
To the Internet
Network router/Network hub (not supplied)
R
Also connect networked computers.
LAN cable (not supplied)
R
To assure continued emission limit compliance,
use only shielded LAN cable (Category 5 (Cat-5)
Ethernet cable).
IMPORTANT NOTICE FOR THE USB
CONNECTION
R
DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 19).
Note:
R
Do not place any objects within 10 cm of the right, left
and back sides of the unit.
Using network router/network hub
R
We recommend using network routers/network hubs
(
C
) under secure network environments. Consult
your network administrator for firewall settings, etc.
R
The warranty does not cover damage due to security
problems or any inconveniences relating to it.
2.2 Turning the power switch ON
Turn the power switch to the ON position (
A
).
A
15
2. . Preparation
2. Preparation