R
Computer features (printing, scanning, etc.) may not
function properly in the following situations:
– When the unit is connected to a computer that
was custom-built by the user.
– When the unit is connected to the computer via a
PCI card or other expansion card.
– When the unit is connected to another piece of
hardware (such as a USB hub or interface
adapter) and not connected directly to the
computer.
To change the settings
You can change the settings for Multi-Function Station
beforehand.
1.
Select
[Settings]
from Multi-Function Station.
2.
Click the desired tab and change the settings.
A
[OK]
[General]
–
[Launcher display setting]
: To select the display
type of the launcher.
–
[OCR Path]
: To select the OCR software.
–
[PC name list up on device]
(LAN connection only):
To select whether or not your computer name is
displayed on the unit.
–
[PC name]
(LAN connection only): The computer
name that will be displayed on the unit.
R
Assign a unique name for the
[PC name]
to avoid
errors, or the scanned image may be sent to the
incorrect computer.
[Scan]
–
[Save to]
: To select the folder where the scanned
image will be saved.
–
[Viewer][File][Email][OCR][Custom]
: To change
scanning settings for Multi-Function scan application.
To select the default Email software
The default Email software is used when using scan to
email (page 26).
You can select the default Email software as follows.
For Windows 2000:
1. [Start]
A
[Settings]
A
[Control Panel]
A
[Internet Options]
A
[Programs]
A
[E-mail]
2.
Select the desired MAPI-compliant Email software
such as
[Outlook Express]
, etc.
A
[OK]
For Windows XP:
1. [Start]
A
[Control Panel]
A
[Internet Options]
A
[Programs]
A
[E-mail]
2.
Select the desired MAPI-compliant Email software
such as
[Outlook Express]
, etc.
A
[OK]
For Windows Vista:
1. [Start]
A
[Control Panel]
A
[Internet Options]
A
[Programs]
A
[Set programs]
A
[Set
program access and computer defaults]
R
If the
[User Account Control]
dialogue box
appears, click
[Continue]
.
2. [Custom]
3.
Select the desired MAPI-compliant Email software
such as
[Windows Mail]
, etc. from
[Choose a
default e-mail program]
.
A
[OK]
For Windows 7:
1. [Start]
A
[Control Panel]
A
[Network and
Internet]
A
[Internet Options]
A
[Programs]
A
[Set programs]
A
[Set program access and
computer defaults]
2. [Custom]
3.
Select the desired MAPI-compliant Email software
from
[Choose a default e-mail program]
.
A
[OK]
22
2. Preparation
