6.1 Programming
M
Set
N
M
Menu
N
1
M
Menu
N
2
Press
MBN
and the 3-digit code (page 38 to
3
Press the appropriate selection to display the desired
setting.
R
This step will vary depending on the feature.
4
M
Set
N
5
Press
M
Menu
N
to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1.
Start Multi-Function Station.
A
[Utilities]
A
[Configuration Web Page]
R
You can also access the unit by entering its IP
address on the web browser.
2.
Select the desired category from the menu bar.
[Device]:
features of the unit
[Network]:
network features
3.
Type
“root”
as the user name, then enter the
password (feature #155 on page 38).
A
[OK]
4.
Select the desired feature from the menu.
5.
Change the settings or edit the information.
R
This step will vary depending on the feature.
6. [Submit]
R
The new setting will be transferred to the unit.
7.
Close the web browser.
Note:
R
The settings displayed in the web browser will be
updated by clicking
[Reload]
.
37
6. . Programmable Features
6. Programmable Features