6.6 LAN features
Feature/Code
Selection
LAN setting with a DHCP
server
MBNM
5
NM
0
NM
0
N
M
0
N
“
DISABLED
”
: Deactivates this feature.
M
1
N
“
ENABLED
”
(default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
MBNM
5
NM
0
NM
1
N
This feature is available when feature #500 is deactivated.
1.
M
Menu
N
A
MBNM
5
NM
0
NM
1
N
A
M
Set
N
2.
Enter the IP address of the unit on the LAN using the dial keypad.
A
M
Set
N
A
M
Menu
N
Setting the Subnet mask for
the LAN connection
MBNM
5
NM
0
NM
2
N
This feature is available when feature #500 is deactivated.
1.
M
Menu
N
A
MBNM
5
NM
0
NM
2
N
A
M
Set
N
2.
Enter the subnet mask of the network on the LAN using the dial keypad.
A
M
Set
N
A
M
Menu
N
Setting the default gateway
for the LAN connection
MBNM
5
NM
0
NM
3
N
This feature is available when feature #500 is deactivated.
1.
M
Menu
N
A
MBNM
5
NM
0
NM
3
N
A
M
Set
N
2.
Enter the default gateway of the network on the LAN using the dial keypad.
A
M
Set
N
A
M
Menu
N
Setting the primary DNS
server for the LAN
connection
MBNM
5
NM
0
NM
4
N
This feature is available when feature #500 is deactivated.
1.
M
Menu
N
A
MBNM
5
NM
0
NM
4
N
A
M
Set
N
2.
Enter the primary DNS server of the network on the LAN using the dial
keypad.
A
M
Set
N
A
M
Menu
N
Setting the secondary DNS
server for the LAN
connection
MBNM
5
NM
0
NM
5
N
This feature is available when feature #500 is deactivated.
1.
M
Menu
N
A
MBNM
5
NM
0
NM
5
N
A
M
Set
N
2.
Enter the secondary DNS server of the network on the LAN using the dial
keypad.
A
M
Set
N
A
M
Menu
N
Setting the machine name
MBNM
5
NM
0
NM
7
N
1.
M
Menu
N
A
MBNM
5
NM
0
NM
7
N
A
M
Set
N
2.
Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 49 for character entry).
R
The first and last letter must be an English alphabet or numbers.
R
Hyphen can also be entered using
M
1
N
.
3.
M
Set
N
A
M
Menu
N
Note:
R
In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
MBNM
5
NM
0
NM
8
N
1.
M
Menu
N
A
MBNM
5
NM
0
NM
8
N
A
M
Set
N
2.
The MAC address of the unit will be displayed.
A
M
Menu
N
Setting the Bonjour feature
MBNM
5
NM
1
NM
3
N
M
0
N
“
DISABLED
”
: Deactivates this feature.
M
1
N
“
ENABLED
”
(default): The Bonjour feature is enabled.
Viewing the network status
MBNM
5
NM
2
NM
6
N
(LAN connection only)
45
6. Programmable Features