1.1 For your safety
To prevent severe injury and loss of life/property,
read this section carefully before using the unit to
ensure proper and safe operation of your unit.
R
The following symbols are used to classify and
describe the level of hazard and injury caused
when the denotation is disregarded and improper
use is performed.
Denotes a potential hazard that could result in serious
injury or death.
Denotes hazards that could result in minor injury or
damage to the unit.
R
The following symbols are used to classify and
describe the type of instructions to be observed.
This type of symbol is used to alert users
to a specific operating procedure that
must be performed carefully.
This type of symbol is used to alert users
to a specific operating procedure that
must not be performed.
This type of symbol is used to alert users
to a specific operating procedure that
must be emphasized in order to operate
the unit safely.
Power and ground connection
Unplug this unit from power outlets if it
emits smoke, an abnormal smell or
makes unusual noise. These conditions
can cause fire or electric shock. Confirm
that smoke has stopped and contact an
authorised service centre.
Use only the power source marked on the
unit. If you are not sure of the type of
power supplied to your home, consult
your dealer or local power company.
For safety purposes this unit is equipped
with a grounded plug. If you do not have
this type of outlet, please have one
installed. Do not ignore this safety feature
by tampering with the plug.
Do not place objects on the power cord.
Install the unit where no one can step or
trip on the cord.
Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
Completely insert the AC adaptor/power
plug into the power outlet. Failure to do
so may cause electric shock and/or
excessive heat resulting in a fire.
Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
Never touch the plug with wet hands.
There is a danger of electric shock.
Installation
Place the unit securely on a stable, level
surface. Serious damage and/or injury
may result if the unit falls.
To prevent the risk of fire or electrical
shock, do not expose this product to rain
or any type of moisture.
Use this unit in a well ventilated area.
Particularly, if you will be using the unit for
extended periods of time or will be
printing in large volumes, be sure to
ventilate the room sufficiently.
Operating safeguards
Turn the power switch OFF before
cleaning. Do not use liquid or aerosol
cleaners.
Do not cover slots and openings on the
unit. They are provided for ventilation and
protection against overheating. Never
place the unit near radiators, or in a place
where proper ventilation is not provided.
Detailed operating instructions are on the CD-ROM.
3
1. . Important Information
1. Important Information
