6. Fax (KX-MB781 only)
39
2
Press
{V}
or
{^}
repeatedly to display the desired
broadcast memory (
“
<BROADCAST>
”
or
“
<MANUAL
BROAD>
”
).
i
{
MENU
}
i
{*}
3
Press
{V}
or
{^}
repeatedly to display the desired
item you want to add.
i
{
SET
}
L
To add other items, repeat this step (up to 20
items).
4
{
STOP
}
Note:
L
When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1
{
DIRECTORY
}
2
Press
{V}
or
{^}
repeatedly to display the desired
broadcast memory (
“
<BROADCAST>
”
or
“
<MANUAL
BROAD>
”
).
i
{
MENU
}
i
{#}
3
Press
{V}
or
{^}
repeatedly to display the desired
item you want to erase.
L
To cancel erasing, press
{
STOP
}
.
4
{
SET
}
i
{
SET
}
i
{
STOP
}
6.4.4 Sending the same document to pre-
programmed parties
To send the same document using the scanner glass
1.
Set the original (page 17).
2.
If necessary, change to the desired resolution (page
35) and the desired contrast (page 35).
3.
Press
{
BROADCAST
}
or
{
MANUAL BROAD
}
.
L
To send a single page, skip to step 5.
L
To send multiple pages, go to the next step.
4.
Place the next page.
i
{
SET
}
L
To send more pages, repeat this step.
5.
{
START
}
L
After transmission, the unit will automatically print
a report (
broadcast sending report
).
Note:
L
To stop sending, see page 61.
L
If you select
“
FINE
”
,
“
SUPER FINE
”
or
“
PHOTO
”
resolution, the number of pages that the unit can
send will decrease.
L
If the document exceeds the memory capacity,
sending will be canceled.
L
If a party is busy or does not answer, it will be skipped
and redialed later.
To send the same document using the auto
document feeder
1.
Set the original (page 17).
2.
If necessary, change to the desired resolution (page
35) and the desired contrast (page 35).
3.
Press
{
BROADCAST
}
or
{
MANUAL BROAD
}
.
MB271-781-PFQX2722ZA-OI-en.book Page 39 Tuesday, May 22, 2007 5:20 PM
