9. Programmable Features
53
Setting the Error Correction
Mode (ECM)
{#}{
4
}{
1
}{
3
}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax transmission / reception, the
unit will support the communication.
Setting the connecting tone
{#}{
4
}{
1
}{
6
}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
L
The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
4
}{
3
}{
0
}
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
See page 47 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
4
}{
3
}{
1
}
{
1
}
“
A
”
{
2
}
“
B
”
{
3
}
“
C
”
{
4
}
“
D
”
{
5
}
“
B-D
”
(default)
See page 47 for details.
Setting auto reduction
feature
{#}{
4
}{
3
}{
2
}
To receive a fax document that is longer than your recording paper.
{
0
}
“
OFF
”
: The unit will print the original size.
{
1
}
“
ON
”
(default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
4
}{
3
}{
4
}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L
The fax activation code must be different from the code that you
programmed on the answering machine.
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
1.
{
MENU
}
i
{#}{
4
}{
3
}{
4
}
2.
Press
{
1
}
to select
“
ON
”
.
i
{
SET
}
3.
Enter your code from 2 to 4 digits, using 0–9,
{*}
and
{#}
.
L
The default code is
“
;
#9
”
.
L
Do not enter “0000”.
4.
{
SET
}
i
{
MENU
}
Setting the memory reception
alert
{#}{
4
}{
3
}{
7
}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{
4
}{
3
}{
8
}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
0
}
“
OFF
”
: You have to press
{
START
}
for fax reception.
{
1
}
“
ON
”
(default): You do not have to press
{
START
}
for fax reception.
Feature/Code
Selection
MB781C-PFQX2742ZA-OI-en.book Page 53 Tuesday, September 4, 2007 1:24 PM
