background image

Important Information

5

Detailed operating instructions are on the CD-ROM.

Important Information

Safety Instructions

1Detailed operating instructions are on the CD-ROM.

For your safety

To prevent severe injury and loss of life/property, read 
this section carefully before using the unit to ensure 
proper and safe operation of your unit.

L

The following symbols are used to classify and 
describe the level of hazard and injury caused 
when the denotation is disregarded and 
improper use is performed.

L

The following symbols are used to classify and 
describe the type of instructions to be observed.

Power and ground connection

Installation

Denotes a potential hazard that could result in 
serious injury or death.

Denotes hazards that could result in minor injury or 
damage to the unit.

This type of symbol is used to alert users 
to a specific operating procedure that 
must be performed carefully.

This type of symbol is used to alert users 
to a specific operating procedure that 
must not be performed.

This type of symbol is used to alert users 
to a specific operating procedure that 
must be emphasized in order to operate 
the unit safely.

Use only the power source marked on the 
unit. If you are not sure of the type of power 
supplied to your home, consult your dealer 
or local power company.

For safety purposes this unit is equipped 
with a grounded plug. If you do not have this 
type of outlet, please have one installed. Do 
not defeat this safety feature by tampering 
with the plug.

Do not place objects on the power cord. 
Install the unit where no one can step or trip 
on the cord.

Do not overload power outlets and 
extension cords. This can result in the risk of 
fire or electric shock.

Completely insert the AC adaptor/power 
plug into the power outlet. Failure to do so 
may cause electric shock and/or excessive 
heat resulting in a fire.

Regularly remove any dust, etc. from the AC 
adaptor/power plug by pulling it from the 
power outlet, then wiping with a dry cloth. 
Accumulated dust may cause an insulation 
defect from moisture, etc. resulting in a fire.

Unplug this unit from power outlets if it emits 
smoke, an abnormal smell or makes 
unusual noise. These conditions can cause 
fire or electric shock. Confirm that smoke 
has stopped and contact an authorised 
service centre.

Never touch the plug with wet hands. There 
is a danger of electric shock.

Place the unit securely on a stable, level 
surface. Serious damage and/or injury may 
result if the unit falls.

To prevent the risk of fire or electrical shock, 
do not expose this product to rain or any 
type of moisture.

MC6040_6260CX-PNQW1377ZA-QRG-en.book  Page 5  Wednesday, July 30, 2008  10:24 AM

Summary of Contents for KX-MC6040 - Color Laser Multi-Function...

























Reviews: