![background image](http://html.mh-extra.com/html/panasonic/kx-ncp1000/kx-ncp1000_programming-manual_18594099.webp)
Q
I changed the FCO of a Portable Station, but the display of the Portable Station still
shows the old FCO.
A
•
Turn the Portable Station off and back on again, to force it to re-register its location.
Q
If I delete the extension number of a Portable Station, and then turn the Portable
Station off and back on again, it does not function correctly.
A
•
Do not delete the extension number of the Portable Station, as this information is
necessary for it to operate.
Numbering
Q
How do I change the extension number of a wired extension?
A
•
Change the extension number of the target port to the new number, and click
Apply
.
Next, set the port to OUS status, and then back to INS status.
Q
I changed the extension number of a wired extension while the extension was
engaged in a call, but the display still shows the previous extension number.
A
•
The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
Q
How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A
•
Perform the following steps:
1.
Open the
4.9 [2-6-1] Numbering Plan—Main
screen.
2.
Enter a 2-digit number in
Leading Number
, or change
No. of Additional
Digits
from "x" to "xx".
For more details, see
What is the procedure to modify the Numbering Plan?
in
Numbering
.
Q
How do I set a 3-digit numbering plan?
A
•
There are 2 methods of creating a 3-digit numbering plan, using
4.9 [2-6-1]
Numbering Plan—Main
:
1.
Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example:
Leading Number = 10;
No. of Additional Digits
= x
In this example, extension numbers 100 to 109 can be used.
2.
Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example:
Leading Number
= 1;
No. of Additional Digits
= xx
In this example, extension numbers 100 to 199 can be used.
For more details, see
What is the procedure to modify the Numbering Plan?
in
Numbering
.
Q
What is the procedure to modify the Numbering Plan?
PC Programming Manual
99
2.7.1 Frequently Asked Questions (FAQ)
Summary of Contents for KX-NCP1000
