3.
Set passwords for the SIP Extensions.
a.
Click the cell in the
Connection
column for each
SIP Extension you wish to register. The Command
Connection screen appears.
b.
Click
OUS
.
c.
Enter a password in the Password box for each
SIP Extension.
d.
Click
Apply
.
e.
Click the cell in the
Connection
column for each
SIP Extension to which a password has been
assigned. The Command Connection screen
appears.
f.
Click
INS
.
g.
Click
OK
.
Note
Alternatively, it is possible to set an extension
number as a password for each SIP Extension
automatically.
•
In order to set the password automatically, do the
following in substitution for step
c
of the procedure
above.
a.
Click
Copy to
. A screen will appear with
information on assigned extension numbers
for SIP Extensions.
b.
Click
Select All
.
c.
Click
Execute
to copy each Extension
Number to Password.
d.
Click
Yes
.
e.
Click
OK
to return to the Port Property screen.
Document Version 2009-12
IP Networking Guide
79
4.5.1 Registering IP Telephones
Summary of Contents for KX-NCP500
