manualshive.com logo in svg

Panasonic KX-NCP500, User Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

Important Information

SAVE THESE INSTRUCTIONS

WARNING

SAFETY REQUIREMENTS

For All Telephone Equipment

•

The product must only be installed and serviced by qualified service personnel. The product should be
used as-is from the time of purchase; it should not be disassembled or modified. Disassembly or
modification can cause a fire, electric shock, or damage to the product.

•

Do not allow rain to fall on the product or expose the product to moisture. Do not let water, oils, or other
liquids to splash onto the product. Such conditions can lead to fire or electric shock, and may impair the
performance of the product.

•

Follow all warnings and instructions marked on the product.

•

Do not place the product on an unstable or uneven surface. If the product were to fall over, it may cause
injury or damage to the product.

•

Products that require a power source should only be connected to the type of electrical power supply
specified on the product label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.

•

For safety purposes some products are equipped with an earthed plug. If you do not have an earthed outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.

•

Do not allow anything to rest on the power cord. Do not locate the product where the power cord may be
stepped on or tripped on.

•

Do not supply power to a combination of devices that exceeds the total rated capacity of the wall outlets
or extension cables used. If outlets, power strips, extension cords, etc. are used in a manner that exceeds
their rated capacity, they emit large amounts of heat, which could cause a fire.

•

Regularly clean dust off of all equipment. Excessive amounts of dust can lead to fire or electric shock, and
may impair the performance of the product.

•

Unplug the product from the wall outlet and contact your dealer in the following cases:

a.

When the power supply cord or plug is damaged or frayed.

b.

If liquid has been spilled into the product.

c.

If the product has been exposed to rain or water.

d.

If the product does not operate according to the operating instructions. Adjust only the controls that are
explained in the operating instructions. Improper adjustment of other controls may result in damage
and may require service by a qualified technician to restore the product to normal operation.

e.

If the product has been dropped or the cabinet has been damaged.

f.

If product performance deteriorates.

For the PBX

•

If damage to the unit exposes any internal parts, disconnect the power supply cord immediately and return
the unit to your dealer.

•

Unplug the unit(s) from the AC outlet if the system emits smoke, an abnormal smell or makes unusual
noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an
authorised Panasonic Factory Service Centre.

•

This unit is equipped with an earthed plug. For safety reasons this plug must only be connected to an
earthed outlet that has been installed according to applicable regulations.

•

Do not insert objects of any kind into this product, as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.

8

User Manual

Important Information

Summary of Contents for KX-NCP500



















































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

SpectraLink Link 150 Installation And Operation Manual preview
Link 150
Brand: SpectraLink Pages: 89
Samsung OfficeServ 7070 System Description preview
OfficeServ 7070
Brand: Samsung Pages: 95

Brands by name

Popular brands

Load more brands