manualshive.com logo in svg

Panasonic KX-NCP500, Features Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

6.

A Call From 333-3333 Arrives at Ext. 102

(Rapid Red 
 Flashing)

SDN buttons

(Off)

(Extn. 103)

(Rapid Red 
  Flashing)

(Extn. 102)

Extn. 101 (Boss)

SDN buttons

(Off)

(Extn. 103)

(Extn. 101)

Extn. 102 (Boss)

Extn. 103 (Secretary)

PDN buttons

(Off)

(Off)

(Off)

PDN buttons

(Off)

(Green On)

(Rapid Green
 Flashing)

PDN buttons

(Off)

(Off)

(Rapid Green
 Flashing)

SDN buttons

(Rapid Red
  Flashing)

(Extn. 102)

(Rapid Red 
 Flashing)

(Extn. 101)

7.

The Call From 333-3333 is Answered by Ext. 103

(Rapid Red
 Flashing)

SDN buttons

(Off)

(Extn. 103)

(Red On)

(Extn. 102)

Extn. 101 (Boss)

SDN buttons

(Off)

(Extn. 103)

(Extn. 101)

Extn. 102 (Boss)

PDN buttons

(Off)

(Off)

(Red On)

Extn. 103 (Secretary)

PDN buttons

(Off)

(Off)

(Off)

PDN buttons

(Off)

(Green On)

(Rapid Green
 Flashing)

SDN buttons

(Green On)

(Extn. 102)

(Rapid Red 
 Flashing)

(Extn. 101)

8.

The Call From 333-3333 is Transferred by Ext. 103 to Extension 102

SDN buttons

(Off)

(Extn. 103)

(Red On)

(Extn. 102)

Extn. 101 (Boss)

Extn. 102 (Boss)

Extn. 103 (Secretary)

PDN buttons

(Off)

(Off)

(Off)

PDN buttons

(Off)

(Green On)

(Rapid Green
 Flashing)

(Rapid Red
 Flashing)

SDN buttons

(Off)

(Extn. 103)

(Extn. 101)

PDN buttons

(Off)

(Off)

(Rapid Green 
 Flashing)

SDN buttons

(Moderate
 Green Flashing)

(Extn. 102)

(Rapid Red 
 Flashing)

(Extn. 101)

Conditions

[General]

•

A flexible button of a PT and a PS can be customised as a PDN or SDN button. A flexible button on a DSS
Console can be customised as an SDN button.

•

An extension can have up to eight PDN buttons.

•

If none of an extension’s PDN buttons are idle, the extension will not receive incoming calls, including Call
Waiting. Therefore, it is strongly recommended for PDN extensions to have at least three PDN buttons.

•

Through COS programming, it is possible to select whether extensions can create SDN buttons on their
own extensions using PT programming.

•

Up to eight different extensions can assign SDN buttons corresponding to the same PDN extension.

•

When a PDN extension has an idle CO button or ICD Group button, calls will arrive on the following buttons
according to the following priority:

–

Incoming intercom calls to an ICD group: ICD Group button 

®

 PDN button

–

Incoming trunk calls: S-CO button 

®

 G-CO button 

®

 L-CO button 

®

 PDN button

–

Incoming trunk calls to an ICD group: ICD Group button 

®

 S-CO button 

®

 G-CO button 

®

 L-CO button

®

 PDN button

•

When multiple calls of the same status (e.g., on hold) are on a PDN extension, the status of the newest
call will be displayed on the corresponding SDN extensions. For example, if a PDN extension has two calls
ringing, an SDN extension will answer the call that arrived at the PDN extension last, when pressing the
SDN button.

•

When a PDN extension is a member of an ICD group in Ring Distribution method, and an incoming call
arrives at the ICD group, the incoming call status will not appear on the LEDs of the corresponding SDN
extensions (

®

 1.2.2.1  Incoming Call Distribution Group Features—SUMMARY).

Feature Guide

115

1.7.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension

Summary of Contents for KX-NCP500





















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

Yeastar Technology S50 Installation Manual preview
S50
Brand: Yeastar Technology Pages: 13
Panasonic KMS1409096CE Service Manual preview
KMS1409096CE
Brand: Panasonic Pages: 191

Brands by name

Popular brands

Load more brands