background image

Feature Guide References

1.5.5.3  Trunk Access

Trunk Answer From Any Station (TAFAS)

[700] External Pager Floating Extension Number

Feature Guide References

1.17.3  Trunk Answer From Any Station (TAFAS)

Trunk Busy Out

[511] Manager Assignment

Feature Guide References

1.5.4.6  Trunk Busy Out

Trunk Call Limitation

[472] Extension-to-Trunk Call Duration

[473] Trunk-to-Trunk Call Duration

[502] Trunk Call Duration Limitation

Feature Guide References

1.11.8  Trunk Call Limitation

Verification Code Entry

[120] Verification Code

[121] Verification Code Name

[122] Verification Code Personal Identification Number (PIN)

[123] Verification Code COS Number

Feature Guide References

1.9.6  Verification Code Entry

Virtual PS

[690] PS Registration

Feature Guide References

1.25.6  Virtual PS

Voice Mail (VM) Group

[601] Terminal Device Assignment

[660] VM Group Floating Extension Number

Feature Guide References

1.24.1  Voice Mail (VM) Group

Voice Mail DPT (Digital) Integration

[201] Transfer Recall Time

Feature Guide References

PT Programming Manual

69

Feature Programming References

Summary of Contents for KX-NCP500









































































Reviews: