Panasonic KX-NCP500 Operating Manual Download

Page: 90 / 230

To set/cancel

Press

AUTO ANS

While on-hook

AUTO ANS

MUTE

•

The AUTO ANS button light shows the current status as follows:

Off:

Not set

Red on:

Set

•

PS users: Refer to "Operating Instructions" for the PS.

1.3.32 Hands-free Operation

You can have a conversation in hands-free mode using the SP-PHONE button.

To make/answer a call

Press

SP-PHONE

•

When performing hands-free operation:

–

If it is difficult to hear the other party’s voice,

Increase the volume using the Navigator Key, Jog Dial, or Volume Key.

–

If the other party has difficulty hearing you,

Decrease the volume.

–

If the other party reports that your voice echoes,

Use the telephone in a room that has curtains, carpeting or both.

–

If parts of the conversation cannot be heard,

If you and the other party speak at the same time, parts of your conversation may be lost.
To avoid this, try to speak alternately.

1.3.33 Headset Operation

–

Headset Operation

–

Answer/Release Button

Operating Manual

Document Version 2010-08

1.3.33 Headset Operation

Summary of Contents for KX-NCP500







































































































































































































































Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands

Panasonic KX-NCP500, Operating Manual

Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands