manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

PT Programming Manual References

[601] Terminal Device Assignment
[660] VM Group Floating Extension Number

Feature Manual References

19.1.4  Voice Mail DPT (Digital) Integration
19.1.5  Voice Mail DTMF Integration
21.1  Capacity of System Resources

19.1.4  Voice Mail DPT (Digital) Integration

Description

A Panasonic VPS that supports DPT (Digital) Integration (e.g., the KX-TVP200) can be connected to this PBX
in a tightly integrated fashion.
DPT (Digital) Integration features can be used when the VPS is connected through DPT ports of the PBX.

Feature Explanation
1.

Automatic Configuration—Quick Setup

The PBX informs the VPS of its extension numbers and the floating extension numbers of the incoming
call distribution groups so that the VPS can create mailboxes with this data automatically.

2.

FWD to a Mailbox of the VPS

If an extension user sets FWD to the VPS, incoming calls are forwarded to the VPS. (

®

 6.1.6  FWD (Call

Forwarding)) The PBX sends a mailbox number of the forwarding extension to the VPS. Therefore the
caller can leave a message in the mailbox of the extension without knowing the mailbox number.

3.

Intercept Routing to a Mailbox of the VPS

If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be redirected to
the VPS (

®

 9.1.11  Intercept Routing). If the "

Intercept to Mailbox for Call to Extension

"

setting is enabled through system programming, the PBX sends the mailbox number of the intercepted
extension to the VPS.
If the VPS is set as the overflow destination of an Incoming Call Distribution (ICD) Group and the
"

Overflow to Mailbox for Call to ICD Group

" setting is enabled through system programming,

the PBX sends the mailbox number of the ICD group to the VPS.
Therefore the caller can leave a message in the mailbox of the extension without knowing the mailbox
number.
If either of these settings is disabled, calls of the corresponding type are handled by the Trunk Service
(e.g., Automated Attendant) in the VPS.

®

 5.18  [3-7-1] VM(DPT) Group—System Settings—

Intercept to Mailbox for Call to Extension

®

 5.18  [3-7-1] VM(DPT) Group—System Settings—

Overflow to Mailbox for Call to ICD Group

4.

Voice Mail (VM) Transfer Button

An extension user can transfer a call to a mailbox of an extension by pressing the VM Transfer button and
entering the number of the extension. The transferred caller can then leave a message in the mailbox. The
VM Transfer button can also be used by extension users at other times, as follows:

a.

By pressing the VM Transfer button when the extension is idle, the extension's mailbox is called and
Voice Mail messages can be listened to. This feature can be used even if the Message Waiting lamp
is not on.

b.

Pressing the VM Transfer button while a call is incoming will redirect the call to the called extension's
mailbox. This is useful when the called extension user does not want to answer the call.

c.

If you call an extension, and the other party does not answer, pressing the VM Transfer button will
transfer your call to the called extension's mailbox so that you can leave a message. This feature can
also be used when the called extension is busy or set to DND.

364

Feature Manual

Document Version  2013-05  

19.1.4 Voice Mail DPT (Digital) Integration

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

Panasonic KX-TDE200 Installation Manual preview
KX-TDE200
Brand: Panasonic Pages: 204
SpectraLink Link 3000 MCU Maintenance And Diagnostics preview
Link 3000 MCU
Brand: SpectraLink Pages: 48
Bicom Systems OfficeBox Installation Manual preview
OfficeBox
Brand: Bicom Systems Pages: 25

Brands by name

Popular brands

Load more brands