Panasonic KX-NCP500 Features Manual Download

Page: 38 / 468

1.1.3 Incoming Call Indication Features

1.1.3.1 Incoming Call Indication Features—SUMMARY

Description

Incoming calls are indicated by various methods as follows:

Type

Feature

Description & Reference

Ring Tone

Ring Tone Pattern
Selection

A telephone rings when receiving a call. The ring
tone patterns can be changed for each incoming
call type.

1.1.3.2 Ring Tone Pattern Selection

Voice-calling

Alternate Receiving—
Ring/Voice

A PT user can select to receive intercom calls by
ring tone or by voice, through personal
programming.

1.5.3 Intercom Call

LED
(Light Emitting Diode)

LED Indication

The light shows line conditions with a variety of light
patterns.

1.20.3 LED Indication

Display (Caller’s
Information)

Display Information

The display shows the caller’s information.

1.20.4 Display Information

External Pager

Trunk Answer from
Any Station (TAFAS)

The external pager sends a ring tone when
receiving a call.

1.17.3 Trunk Answer From Any Station (TAFAS)

Tone/Voice during a
Conversation

Call Waiting

A busy extension hears a tone, or voice from the
handset/built-in speaker indicating that another
incoming call is waiting.

1.1.3.3 Call Waiting

Feature Guide

1.1.3 Incoming Call Indication Features

Summary of Contents for KX-NCP500





















































































































































































































































































































































































































































































Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands

Panasonic KX-NCP500, Features Manual

Search results

Summary of Contents for KX-NCP500

Reviews:

Related manuals for KX-NCP500

Brands by name

Popular brands