Panasonic KX-NCP500 Pc Programming Manual Download | Manualshive

Page: 48 / 892

background image

The error data files are snapshots of the configuration of the PBX taken automatically when a major error
causes a system reset. They can be analyzed by your dealer to identify the source of a problem. If there is
only one error data file, its name will be $SYSERR. If there is more than one file, the files will be numbered in
chronological order, up to a maximum of 9 files.

To transfer files to the PC
1.

From the

Utility

menu, select

File Transfer PBX (SD Card) to PC

.

2.

Select the file to download from the list of files on the SD memory card.
Only the files listed in the table above can be downloaded. Selecting any other file will cause an error
message to be displayed.

3.

Click

Transfer

.

The Save dialog box will be displayed

4.

Navigate to the folder in which you want to save the file.

5.

Enter a file name.

6.

Click

Save

.

A window showing the download progress will be displayed.
A message will be displayed when the transfer is complete.

7.

Click

OK

.

2.6.4 Utility—SD Card File View and Load

Displays a list of files on the SD memory card, and allows you to update the programs stored in LPR cards
(cards with local processors) and Cell Stations (CSs).
This option is only available at Installer level.
To update the program stored in an LPR card, the card must first be set to out of service (OUS). To update
the program stored in a CS, the port of the card (DHLC/DLC) that the CS is attached to must be set to OUS,
but the card itself must be set to in service (INS). Only cards that are in the correct status will be displayed.
The name, date and time of creation, and size of files are displayed.
This utility can also display information on activation key files stored in the SD memory card.
The effective date, IPCMPR-ID, activated feature type, number of activated features, and expiration date of
activation keys are displayed on the Detail screen. The expiration date of preinstalled activation keys is
displayed as "Unlimited duration".

To view and load files on the SD memory card
1.

From the

Utility

menu, select

SD Card File View and Load

.

2.

Click on the name of the desired file.
Only files containing program data (whose filenames start with "P") can be selected.

3.

Click

Detail

.

The Detail screen will be displayed. Header information from the chosen SD memory card file is displayed
on the left.

4.

From the

Card

drop-down list on the right, select the card(s) whose software you want to update.

•

To update a specific card or port:

•

LPR cards: select the slot number and card name.

•

CSs: select the slot number and card name, and then select the related CS port from the drop-down
list directly below.

•

To update all matching cards simultaneously:

•

Select "ALL".

5.

Click

View

to update the displayed header information of the selected files.

The file with the higher File Version and File Revision numbers is newer.

6.

Click

Load

to update the file stored on the PBX.

When the update is finished, a message will be displayed.

48

PC Programming Manual

Document Version 2009-12

2.6.4 Utility—SD Card File View and Load

«
...
46
47
48
49
50
...
»

Summary of Contents for KX-NCP500





























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

Brand: Matrix Pages: 996

Brand: EPIGY Pages: 50

Brand: EPIGY TECHNOLOGIES Pages: 63

MyPBX Enterprise

Brand: Yeastar Technology Pages: 172

Communication Server 1000M

Brand: Nortel Pages: 122

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands