2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item, as shown in the
example below.
Disable/
Enable
SELECT
[351]
Carrier Table No.
Trunk Group No.
END
ENTER
ENTER
SELECT
01–10
01–64
However, please note that slot and port entry values are not listed within each programming item. These values
vary depending on the model of PBX and the card type installed, as shown below.
Available Slot Entry Values
PBX Model
Free Slot Number
Supported Cards
KX-NCP500
01–05
All cards
KX-NCP1000
01–07
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Card Type
Port Number
Related Programming
BRI2
01–02
[400] [409] [42x] [450]
DHLC4
01–04
[600] [601]
DLC8
01–08
DLC16
01–16
DPH2
[72x]
DPH4
LCOT4
01–04
[400] [409] [41x] [450]
Enter values as two-digit numbers (e.g. "04" for port 4).
*1
Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).
PT Programming Manual
21
2.1.2 Maximum Values