45
KX-NCP500GR
To view information on activation key files stored in the SD memory card (Interactive mode only)
1. From the Utility menu, select SD Card File View and Load.
2. Click on the name of the desired activation key file.
3. Click Detail.
The Detail screen will be displayed.
8.1.1.6.
Utility-SD Card File Delete
Allows you to delete files from the SD memory card.
This option is only available at Installer level.
The following essential system files cannot be deleted by this utility:
PBMPR, DBSYS
To delete files from the SD memory card
1. From the Utility menu, select SD Card File Delete.
2. Click on the file to be deleted.
3. Click Delete.
A confirmation screen will be displayed.
4. Click OK.
The display will return to the SD Card File Delete screen.
8.1.1.7.
Utility-Message File Transfer PC to PBX
Transfers Outgoing Message (OGM) files from the PC to the selected MSG/ESVM card.
This option is only available at Installer level, and requires that at least 1 MSG/ESVM card is installed. The OPB card that it is
mounted on must be set to OUS status.
Files are stored on the MSG/ESVM card in the location specified by the fileÅfs header information. Uploaded files are automatically
renamed as necessary. If this location already contains an OGM, it will be overwritten by the newly uploaded message.
To transfer OGMs to an MSG/ESVM card
1. From the Utility menu, select Message File Transfer PC to PBX.
2. Select the target MSG/ESVM card, or "ALL", from the drop-down list, and click OK.
The Open dialog box will be displayed..
3. Select the message files to upload.
It is possible to select multiple files.
4. Click OK.
The files will be uploaded. Files that do not contain message data will be ignored..
When complete, the display will return to the main screen.
8.1.1.8.
Utility-Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the MSG/ESVM card to the PC.
This option is only available at Installer level, and requires that at least 1 MSG/ESVM card is installed. The OPB card that it is
mounted on must be set to OUS status.
To transfer OGMs to the PC
1. From the Utility menu, select Message File Transfer PBX to PC.
2. From the upper drop-down list, select the target MSG/ESVM card.
3. From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialog box will be displayed.
4. Enter a file name.
5. Click Save.
6. Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a number appended to the file
name corresponding to that message's location on the MSG/ESVM card.
When complete, the display will return to the main screen.
Summary of Contents for KX-NCP500GR
