5.5.1 Before Site Survey by Using PS
If you are using a KX-TCA185/KX-TCA285/KX-TCA385, you can skip this procedure.
The section describes the preparation procedure for the Site Survey using one the following PSs.
•
For North America: KX-WT125/KX-WT126/KX-TD7685/KX-TD7695/KX-TD7696
•
For South America: KX-WT115
•
For other countries/areas: KX-TCA155/KX-TCA175/KX-TCA256/KX-TCA275/KX-TCA355/KX-TCA364
Note
Display prompts for the site survey are only available in English.
Checking the CS ID Number
Check the CS ID number label attached to the CS. If the CS ID number label is not attached to the CS, check
the CS ID number using Web Maintenance Console. For details, refer to "CS Information" in the PC
Programming Manual for your PBX.
Assigning the CS ID Number to the PS
Using the KX-WT125/KX-WT126 (for North America)
While pressing 1 and 9,
insert the batteries,
and hold down 1 and 9
for 2 seconds.
0 to 7
0 to 9 and A to F
CS No.
CS ID No.
To enter letters
A: + C: + E: +
B: + D: + F: +
To the initial display
To the
Desired
CS No.
ABC
DEF
GHI
JKL
OPER
WXYZ
ABC
Note
To clear the CS ID number assigned to the PS, follow the procedure below:
While pressing 1 and 9,
insert the batteries,
and hold down 1 and 9
for 2 seconds.
0 to 7
CS No.
To the
Desired
CS No.
OR
To clear one by one
To clear all at once
To the initial display
DEF
WXYZ
42
Installation Guide
5 Appendix
