manualshive.com logo in svg

Panasonic KX-NS300CN, Pc Programming Manual

The Panasonic KX-NS300CN is a versatile communication system that seamlessly integrates with your office setup. Take control of its advanced features with the PC programming manual, available for free download on our website. Explore its endless possibilities with this comprehensive manual, exclusively at 88.208.23.73:8080.

Share
Download
background image

6.9  Tool—UM Data Restore

Follow the procedure below to restore data backed up using the UM Data Backup tool.
This screen can be accessed only in On-line mode.
For more information about the UM Data Backup tool, see 

6.8  Tool—UM Data Backup

. You can restore data

from a USB memory device connected to the PBX or from a file on your local PC.

1.

Select the check boxes of the items to restore.

2.

In 

System Restore

, select 

Local PC

 or 

USB Flash Drive (Main Unit)

.

•

Local PC

Click 

Browse

 and select a backup file from your local PC. The file must have been saved using the

UM Data Backup tool.

•

USB Flash Drive (Main Unit)

When 

USB Flash Drive (Main Unit)

 is selected, the folder selection menu becomes active. Specify

the folder on the USB memory device where the backup data is saved.

•

NAS

When 

NAS

 is selected, the folder selection menu becomes active. Specify the folder on the NAS where

the backup data is saved.

Note

Before selecting 

USB Flash Drive (Main Unit)

, make sure that the USB memory device with the

backup data is connected to the Main unit.

To restore a single file:

Files that match the selected types of items to restore will be highlighted.
Click a file in the list to display its name in the text box. You can also click a folder name to display that
folder’s contents, and then click a file to select it.

To restore multiple files at once:

Folders whose contents match the selected types of items to restore will be highlighted.
Click a folder in the list to display its name in the text box. You can also click a folder name to display that
folder’s contents, and then click a folder to select it.

Note

When restoring data from a local PC, up to 40 files can be selected at one time. When there are a large
number of files to restore, they should be restored from the folder on the USB memory device.

3.

Click 

OK

 to restore the selected file or folder of files.

•

Local PC

The results of the data restore will be downloaded from the PBX as a text file called
"UM_data_restore_result.txt". Save the file to your local PC to view its contents.

•

USB Flash Drive (Main Unit)

The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
USB memory device. To view this file, you must connect the USB memory device to a PC and then
open the text file.

•

NAS

The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
NAS. To view this file, you must connect to the NAS and copy to a PC and then open the text file.

Note

•

When restoring multiple items, only files that match the items for which check boxes have been selected
will be restored. Also, even if data exists in the specified folder of the USB memory device, the data
will not be restored unless the check box of the matching item has been selected.

•

Data in sub-folders of a selected folder will not be restored.

•

If more than one file matches a selected item, the newest file will be restored.

PC Programming Manual

91

6.9 Tool—UM Data Restore

Summary of Contents for KX-NS300CN





















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NS300CN

Panasonic KX-NS700 Pt Programming Manual preview
KX-NS700
Brand: Panasonic Pages: 70

Brands by name

Popular brands

Load more brands