Connection
15
Document Version 2007-06
CAUTION:
When selecting Ethernet cables
Use flexible, high-quality, snagless
(without strain relief) cables. Do not
use cables with coating that may tear
or crack when bent.
To prevent damage to the cables, use
cables
that do not protrude from the
bottom of the base when the
operation board is set to level 1. (For
information on adjusting the angle of
the operation board, refer to
page 13.)
* Use cables as shown.
When connecting cables
Ensure that the Ethernet cables and the AC adaptor cord are
inserted in the grooves, and are clamped to prevent damage to the
connectors. Leave some slack in the AC adaptor cord and the
Ethernet cable connected to the hub.
When connecting headset jack
Ensure that the headset cord is wound around the hook to prevent
damage to the connector.
Ethernet cable
35 mm (1-3/8 in)
or less
NT300M_QRG.fm Page 15 Tuesday, May 22, 2007 11:36 AM