To retrieve a parked call
1.
On the
Calls
screen, select the call you want to
retrieve.
2.
Press
Unpark the call
, and go off-hook.
Operation in Line Buttons mode
To hold the current call in an idle parking zone
1.
On the
Calls
screen, press
(
TRANSFER
).
2.
Press
The display indicates the parking zone that the call
was held in.
3.
Go on-hook.
To hold a call in a specified parking zone
1.
On the
Calls
screen, press
(
TRANSFER
).
2.
Press
, and then enter the number of the
parking zone to park the call in.
When you enter the parking zone number, use 2
digits (e.g., 04).
A window appears indicating the parking zone the
call was held in.
3.
On the window, press
OK
.
4.
Go on-hook.
To retrieve a parked call
1.
Press
, and then enter the number of the
parking zone to retrieve the call from.
When you enter the parking zone number, use 2
digits (e.g., 04).
2.
Go off-hook.
Usage tips
•
You can retrieve a call that was parked by another
extension by using the procedure "To retrieve a
parked call" in "Operation in Line Buttons mode
(Page 74)".
•
If a call is not retrieved within a specified time, you
will hear an alarm as a reminder (Call Park Recall).
If an outside call is not retrieved within a specified
time, it is automatically disconnected.
•
If you hear a reorder tone when retrieving a parked
call, there is no held call. Confirm the stored parking
zone number.
•
After you park a call, you can perform other
operations.
Receiving a Second Call
(Answering Call Waiting)
During a conversation, if a second call arrives, the
Call
Alert
window appears. You will also hear a call waiting
tone.
1.
On the
Call Alert
window, press
Answer
.
When you answer the second call, the current call
will be put on hold.
2.
To return to the original call, retrieve the held call.
See "Holding a Call (Page 73)".
Note
•
To enable this feature, consult your
administrator.
Usage tips
•
Instead of answering the second call, you can
redirect it. See "Redirecting Calls (Page 71)".
Talking to Two Parties
Alternately (Call Splitting)
When you are talking to one party and have another
party on hold, you can switch the call on hold and the
current call.
Operation in Call List mode
1.
On the
Calls
screen, select the call you want to put
on hold.
2.
Press
Transfer the Call
.
3.
Call the second party.
4.
Press
Split the Call
.
Operation in Line Buttons mode
1.
Press
(
TRANSFER
).
2.
Call the second party.
3.
Press
(
TRANSFER
).
74
Operating Instructions
Basic Feature Operation
