•
Default: If a voice mail extension number is
specified in the PBX, the first specified number
is displayed.
•
Maximum 8 digits
•
Allowed characters: *, #, P (pause), 0–9
Incoming Redirect Number
Enter the destination (extension or outside number)
to use as the default destination for redirecting
incoming calls.
•
Maximum 32 digits
•
Allowed characters: *, #, P (pause), 0–9
Language Settings
The Language settings allow you to select the display
language.
You can select from a list of built-in languages, or, if you
have an SD memory card with additional language files,
you can select one of those languages.
To select the display language
1.
Press the
Options
tab >
User Options
>
Language
.
2.
Press the drop-down list to select the display
language.
See "Details for Language Settings (Page 124)".
3.
Press
OK
.
Notice
•
If you have modified any of the preset presence
settings, changing the language resets them to
their default settings.
Note
•
If you change the Language settings, the
KX-NT400 automatically restarts after you
press
OK
.
Details for Language Settings
Language
Press the drop-down list to select the display
language.
•
Default:
English-US
•
Built-in languages: English-US, English-UK,
French, French-CA, German, Spanish, Italian,
Portuguese, Russian, Ukrainian
Another
Select
Another
and then press
to select the
display language from an SD memory card.
Language files must be stored in the following
directory on the SD memory card:
\private\meigroup\pcc\pbxpt\nt400
Note
•
This language setting is not effective for the
sub-display on the
Feature Key
screen, the
Calls
screen (in Line Buttons mode), or the
Programming
screen. To change the language
setting of the sub-display, see "PT
Programming (Page 134)".
•
For details about obtaining additional language
files, consult your dealer.
Directory List Select Settings
The Directory List Select settings allow you to select
which directory lists are displayed on the
Contacts
screen.
To configure the Directory List Select settings
1.
Press the
Options
tab >
User Options
>
Directory
List Select
.
2.
Select the directories you want to display on the
Contacts
screen.
See "Details for Directory List Select Settings
(Page 125)".
3.
Press
OK
.
Usage tips
•
You can refresh the system speed dialling directory
and the extension directory information from the
PBX by pressing
Refresh
.
•
For details about the
Contacts
screen, see
124
Operating Instructions
Settings and Customisation
