Operation Board Angle Adjustment
The angle of the operation board can be set to one of seven angles (level 1 = 30°, level 7 = 60°).
IMPORTANT
•
When you use the KX-NT400 first time, before adjusting the angle of the operation board, press and
hold the angle adjustment button, lift the operation board until you hear the lock click, and then release
the button.
CAUTION
•
Hold the operation board until it is secured at the desired angle.
•
Make sure you do not pinch your fingers when raising or lowering the operation board.
•
Do not squeeze the LCD touch screen when adjusting the operation board; applying too much pressure
will damage the screen.
To raise:
1.
Hold the base of the unit with one hand.
2.
Gently lift the operation board one level at a time to the desired angle.
Operating Instructions
25
Before Operating the Telephone
