167
Options
3
Perform the following steps before you start loading envelopes;
a) Press down on the metal plate to lock it into position.
b) Lift the length guide lever and slide the length guide to the “LTR” size
indicated on the bottom of the cassette. The guide will lock into place.
c) Squeeze the width guide and slide it to the far right side of the cassette.
d) Squeeze the envelope guide lever and slide it to the far rear position.
4
Lift the tab of the rear right guide completely and slide it to the desired
envelope size until it clicks into place.
The envelope size is indicated on the bottom of the cassette.
N
OTE
•
The right side of the rear right guide will line up with the envelope sizes indicated on the
bottom of the cassette.
Metal plate
Length guide
Envelope
guide
Width guide
a
b
c
d
Rear right guide
Tab