175
For Macintosh User’s Guide
The following section explains how to install a PS SIMM (KX-PPSU4) on the KX-P7500 Series.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
page 171
), touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
•
PS SIMM (KX-PPSU4)
C
AUTION
•
Do not drop or bend the PS SIMM.
•
Do not touch the connector edge of the PS SIMM.
•
Protect the PS SIMM from static electricity by keeping it in its antistatic package until you are
ready to install it.
•
Avoid exposing the PS SIMM to direct sunlight, high temperatures, or humidity.
The printer controller board ships with the following memory configuration:
•
The DRAM SIMM connectors numbered CN7 and CN8 are reserved for the printer’s memory.
•
The remaining two connectors CN9 and CN10 are empty and reserved for the PS SIMM.
Installing a PostScript SIMM
Kit contents
Installing PS SIMM
CN 9
PS SIMM
Connector
The two connectors are reserved for the PS SIMM.
CN 10
CN 7
CN 8