99
Using the Printer
The printer can automatically print on both sides of paper by setting the Printing Menu or Finishing
tab of KX-P7500 Series PCL6 Driver.
N
OTES
•
Do not print on both sides of labels, transparencies, envelopes, or paper heavier than
90
g
/m
2
(24 lbs.).
This may damage the printer and cause a jam.
•
You should not expect the same print quality and reliability that you get with one-sided printing.
If you use the driver which has not the properties, you can select “DUPLEX” by setting the operator
panel menu.
1
Make sure “READY” appears on the display.
2
Press ON LINE/CONTINUE button.
“OFFLINE” appears on the display and the printer is off-line.
3
Press MENU button until you see “PRINTING MENU”.
4
Press ITEM button until you see “DUPLEX”.
5
Press VALUE button until the setting you need appears on the display.
(For more information, see
page 78
).
6
Press ENTER/CANCEL button to save the selection.
An asterisk (
¢
) appears beside the current user default setting for that menu item.
N
OTE
•
Settings in the printer driver and software application override operator panel setting.
For instructions of setting the operator panel menu, see
page 72
.
Both side (Duplex) printing
Menu setting procedure