22
Operating the built-in
answering device
Operating the answering device
from a remote location
Operation: Listening to a recorded message from a
remote location
Turn the
(Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press
4
or wait 4 seconds.
Only the new recorded messages will be played
back.
To listen to all the recorded messages, press
5
after
the new messages have been played back.
Preparation: Setting the remote operation ID
1. Press
機能/
決定
(Function/Set).
2. Press
.
3. Press
機能/
決定
(Function/Set).
4. Enter any 4-digit number (remote operation ID) except
or #.
5. Press
機能/
決定
(Function/Set).
6. Press
(Stop).
Example:
Night mode
Press
(Night mode) for about 3 seconds.
“
”
is displayed and
lights on.
When a call is received during night mode, the unit
will handle the call silently, either by storing the
received fax into memory or by recording the caller’s
message.
Night mode allows you to select a block of time
during which the unit will not ring for outside calls
or make sounds when you change the settings.
This feature is useful when you do not want to be
disturbed, for example, while sleeping.
Turn off the night mode
Press
(Night mode) for about 3 seconds.
Printing received fax documents
When new faxes are received,
(Caller ID log/Fax
print indicator) will light on.
To print the faxes, see “Printing a specific fax stored in
memory” on page 19.
Turn on the night mode
light on
light on
留守電暗証番号
1234
Listening to recorded messages
When new messages are recorded, the following will be
displayed.
To listen to the messages, see “Listening to the newly
recorded messages” on page 21.
新しい用件が
録音されました
