98
7.3.3 NDPS Method (Using PServer Method)
After setting up the frame type, perform the following procedures for printing via the
server computer (NetWare 5) from the client computer (Windows 95/Windows 98).
Step 1: Set up the PServer
Step 2: Set up the printer settings of the server computer
Step 3: Set up the printer settings of the client computer
Step1:Setting Up the PServer
Please refer to section
7.4 on
page 112
.
Step2:Setting Up the Printer Settings of the Server Computer
(NetWare 5)
Set up the environment that enables the client computer to login to the network in
NDS mode. For more information, refer to the NetWare On Line manual.
The printer setting of the server computer is set via the client computer.
1. Start the server computer.
2. Start the client (Windows 95/Windows 98) computer.
Login to the server computer as the supervisor of NetWare 5 in NSD
mode.
3. If the NDPS product is not installed, use the server computer to
install it.
(1)Click Novell on the Graphical Console screen (X Server--
Graphical Console), then select Install.
(2)Confirm that the NDPS products are displayed on the Install
Products window. (If not, click New Products and follow the
instructions on the screen.)
4. Confirm that the NDPS Broker has been activated on the server
computer.It automatically activates when NDPS products are
installed.
(1)Press the CTRL key and the ESC key simultaneously.
(2)Make sure that the NDPS Broker is activated.
