Base unit
1
During an outside call, press
M
N
.
R
All registered handsets beep.
2
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
N
to return to the outside call.
3
To complete the transfer, press
MZN
.
Transferring a cellular call
between the handset and a
cellular phone
Transferring a cellular call from the
handset to a cellular phone
1
Press
M
MENU
N
during a cellular call.
2
MbN
:
“
Transfer to cell
”
a
M
SELECT
N
R
The cellular call is transferred to the
cellular phone.
Note:
R
Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
Transferring a cellular call from a
cellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
1
During a conversation using a cellular
phone, press
M
CELL
N
.
R
In the following cases, go to step 3.
– when only 1 cellular phone is paired.
– when a specific line is set to make
cellular calls (page 19).
2
MbN
: Select the desired cellular phone.
a
M
SELECT
N
3
MbN
:
“
Transfer from cell
”
a
M
SELECT
N
R
The call is transferred to the handset.
Note:
R
When you press
M
OFF
N
on the handset to
end the phone app’s cellular call, the call is
transferred to the cellular phone. Use the
cellular phone to disconnect the call.
Depending on the phone app, the call may
be disconnected without being transferred
to the cellular phone.
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold
M N
until
the
MZN
indicator goes out.
R
The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press
MZN
.
R
The cellular call is transferred to the base
unit.
Note:
R
When you press
MZN
on the base unit to
end the phone app’s cellular call, the call is
transferred to the cellular phone. Use the
cellular phone to disconnect the call.
Depending on the phone app, the call may
be disconnected without being transferred
to the cellular phone.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 34), and the
2nd caller’s information is displayed on the
handset if you subscribe to Call Display
(page 43).
24
Making/Answering Calls
PRL262C_PRD262C_OI_(en_en)_0113_ver030.pdf 24
2014/01/13 16:00:09