n
KX-PRSA10
n
KX-PRWA10
{x}
{x}
3
Handset:
Place the handset on the base unit or charger.
R
Continue the operation even when the handset display shows
“
Please
wait for 1 minute.
”
.
4
With the handset still on the base unit or charger, wait until a confirmation tone
sounds and
is displayed.
Note:
R
If an error tone sounds, or if
is displayed, register the handset according to
the base unit’s operating instructions.
For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R
Completely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
R
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
R
Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact an authorised service
centre.
Installation
R
To prevent the risk of fire or electrical shock, do not expose the product to rain
or any type of moisture.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
5
Installation
PRWA10E_PRSA10E(en)_0508_ver012.5 5
2013/05/08 22:39:34
