Adding a phone number to your contacts while dialling
1
After dialling a number manually, tap
.
2
To add the number to an existing contact:
→ Tap the desired contact.
To add the number to a new contact:
→ Tap
[CREATE NEW CONTACT]
.
3
If prompted, follow the on-screen instructions to determine where the contact will be saved.
R
Contacts can be stored in the handset’s memory or synchronised with your Google
account.
R
Tap
[Add new account]
(if displayed) if you want to register a Google account to the
handset. You can also register an account later (page 45).
4
Enter or edit the information as needed and tap
[DONE]
.
Using other features during a call
Speakerphone
Tap
to turn on the speakerphone during a call. Tap
again to switch back to the receiver.
Receiver or speaker volume
Press the volume button up (
) and down (
) repeatedly during a call.
Mute
Tap during a call to mute the handset’s microphone so that the other party cannot hear you.
Tap again to turn the mute off.
Hold
Tap during a call to place the call on hold so that you and the other party cannot hear each
other. Tap again to return to the call.
R
The handset sounds an alarm if a call is held for 9 minutes. If the call remains on hold, the
alarm sounds again 30 seconds later (i.e., after 9 minutes and 30 seconds of being on hold).
The call is disconnected 30 seconds later if it continues to be on hold (i.e., after 10 minutes of
being on hold).
Recall/flash
Tap to use call waiting and answer a second call or switch between calls (page 25). You can
change the recall/flash time if necessary (page 42).
Activating the screen during a call
The handset’s proximity sensor detects when you raise the phone to your ear and automatically
turns off the screen. This not only saves battery power, but also prevents you from inadvertently
operating the screen while talking. The screen turns on again when you move the handset away
from your ear.
23
Phone Features
